500W 1400r/Min 3000 Kg Heavy Duty Sliding Gate Motor With Control
Box
The heavy duty sliding door operator has a manual unlocking
mechanism to move the door in the event of a power outage, and the
powerful three-phase self-ventilating gear motor with its oil bath
gearbox guarantees intensive use.
A control unit with an inverter and acceleration/deceleration ramps
makes the Maxi series industrial sliding door openers not only very
safe but also very powerful.
| Product Name | Heavy duty sliding gate motor |
| Description | G30 |
| Power supply | 380V/Δ |
| Power of motor | 500W |
| Motor speed | 1400r/min |
| Max weight of gate | ≤3000Kg |
| Motor thermal protection | 130℃ |
| Environment temperature range | -20℃ 55℃ |
heavy duty sliding door operator,sliding gate motor industrial
use,sliding gate complete,automatic sliding double door opener
high power sliding door opener industry gate operator oil hwavy
industrial
Packaging Details: Standard Exporting Packing
Measurement of carton box: 34*28*42 cm
Measurement of controller carton box :26*18*10 cm
Weight : 22KG
The main function
1. Digital position detection, long life, high precision and easy
debugging.
2. Stable start and stop, fast speed, independent adjustable speed
of opening and closing.
3. Intelligent self-check to protect system security at all times.
4. It can be delayed to close the gate and cooperate with infrared
protection to realize unattended operation.
5. External pressure wave, infrared, ground sense and other
protection devices can be connected.
6. Using learning remote control technology, the operation is
simple.
7. Ground sense counting function, suitable for high-throughput
application environment.
8. The computer can monitor the device status through the 485
interface.
9. Motor running output, anti-climbing alarm output (both are
switch values).
Warnings to installers and users
1. Before installation and use, please read this Manual carefully.
2. Avoid installing the product where there are vibrations, high-
temperature, high-humidity, flammable, explosives, dust or
corrosive
gases.
3. As there is high voltage electricity inside the product, non-
professionals should not arbitrarily open the lid to avoid electric
shock. For debugging, look for professionals for help.
4. For loss and damage due to unauthorized changes to the original
design of the product, the original manufacturer will assume no
liability or responsibility.
5. An air-break switch must be connected with the power supply
input connector.
6. Before power on and debugging controller, manually adjust the
barrier to the middle position.
7. The power must be cut off before manually operate the barrier.
8.Make sure that the path is unobstructed when the barrier is
running.
9. Safety devices such as Air-wave switch and Photocell are highly
recommended. Check and test them periodically to ensure that they
are effective.
10. Please properly dispose the accessories including plastic bag
and
screws to avoid the hazards such as mistaking and chocking.
11. Please keep this Manual properly for reference.
